Construction to remove the “bullseye” configuration of the QC Airport’s airfield has begun. This $10 million dollar project is funded 100% by the Federal Aviation Administration (FAA). The project involves shortening the general aviation runway by 1,500 feet and creating a new parallel taxiway to the airport’s primary 10,000-foot commercial runway.
Quad Cities International Airport is one of only a handful of U.S. airports which still have more than two intersecting runways. While safety is a primary concern of such a configuration, it also creates operational inefficiency whereby commercial flights have a longer taxi to reach the primary runway. General aviation pilots must also contend with commercial air traffic.
“This project has been a long time coming – we only know of one other commercial airport in the U.S. that has a similar configuration,” said Benjamin Leischner, A.A.E., executive director, Quad Cities International Airport. “These changes will benefit both commercial and general aviation traffic considerably. The shorter runway will be closest to the general aviation hangars creating a campus that is separate from commercial traffic, and commercial aircraft will have a much quicker route to and from the primary runway.”
Valley Construction based out of Rock Island, Illinois, is the lead contractor and expects to complete the project in November 2022. On-site jobs will total anywhere from a crew of 8 up to 30+ during busier phases. There are numerous phases of the project, with phase 1 underway through early May. Intermittent runway closures will occur, but the airport is working closely with airlines to prevent any disruption to normal operations.
Once completed, the shortened general aviation runway will not impact operations for the majority of aircraft currently using it. Runway 5/23 which is 5,000 ft. will be shortened to 3,500 ft. which is more than adequate. Aircraft needing a longer runway will be able to use one of the airport’s commercial runways – Runway 13/31 which is 7,000 ft. or Runway 9/27 which is 10,000 ft.
About Quad Cities International Airport
Quad Cities International Airport is located in Moline, Illinois, and serves passengers from western Illinois and eastern Iowa. With nonstop and connecting destinations, the airport served over 700,000 passengers in 2019. Four major airlines operate out of QC Airport including Allegiant Air, American Airlines, Delta Air Lines and United Airlines. The airport boasts a 10,000-foot runway that can land any aircraft in any weather condition, as well as U.S. Customs and Border Protection as an International Port of Entry Airport, making it ideal for commercial flights and general aviation. Charter and fueling services are available. For more information visit qcairport.com.
2022 Charlotte Douglas International Airport Report of Achievement
Giving back to the community is central to what Charlotte Douglas International Airport and its operator, the City of Charlotte Aviation Department, is about, and last year was no different.
Throughout 2022, while recovering from the COVID-19 pandemic, we continued our efforts to have a positive impact on the Charlotte community. Of particular note, we spent the year sharing stories of how Connections Don't Just Happen at the Terminal - from creating homeownership and employment opportunities to supporting economic growth through small-business development and offering outreach programs to help residents understand the Airport better.
This whitepaper highlights the construction projects, initiatives, programs and events that validate Charlotte Douglas as a premier airport.
Download the whitepaper: 2022 Charlotte Douglas International Airport Report of Achievement.