The U.S. Department of Homeland Security implemented a security directive to increase aviation security in all airports globally. Specifically, Homeland Security is working to “increase security protocols around aircraft and in passenger areas.” Due to this directive, Los Angeles International Airport was in search of a solution that provided the additional security required at their terminals. Airport terminals are high traffic areas for both pedestrians and vehicles, presenting an increased risk for tragic accidents.
Ameristar worked with LAX Airport, consultants, architects, and the general contractor to develop a solution based on the site layout, conditions and security needs. Ultimately, LAX decided to go with our Ultra Shallow Mount Bollards to protect their terminals.
The Ultra Shallow Series is available in three crash tested configurations: M50/P1, PAS68, and K4/L3. All configurations require just 6”-10” of total excavation, enabling contractors to install a crash tested certified product at a fraction of the depth required by traditional products, saving on labor costs and time. This is especially beneficial for airports who may be dealing with multiple levels or underground utilities. For LAX, the terminals remained open during construction, so the bollards had to be installed quickly and with minimal disruption.
At the end of the project, the contractor was very pleased with our manufacturing schedule. The project was complete before the contracted agreement and before the Department of Homeland Security’s deadline.
However, a month and a half after installation, the bollards were put to the test on January 1, 2019. A Lincoln Navigator and a passenger van crashed into the recently installed bollards. The bollards stopped the vehicles from continuing to crash beyond the curb and prevented injury to nearby pedestrians.
Fairbanks International Airport Baggage Transport Conveyor Enhanced With Mod Drive™ System
Airports face a host of unique industry challenges, such as meeting efficiency regulations and seeking out the best maintenance practices to reduce costs and keep operations flowing. In today’s current economic climate, any potential cost savings can go a long way.
In 2019, Alaska’s Fairbanks International Airport (FAI) sought to modernize its equipment and operations. They were dissatisfied with the performance of the gearmotors on their baggage transport conveyors and began searching for new suppliers. Regal approached FAI with a solution that could improve equipment performance and simplify maintenance, with the added benefit of energy cost savings: the Hub City® MOD Drive™ system.
This white paper discusses the hardware deployed, the test results and the annualized expectations for ROI.